User's Manual

PWG-600 User Guide
- 22 -
Setting Microphone volume
To set the volume of the microphone:
• From the desktop, press the “Menu” key.
• Select “Settings” using the “Down key” and press the “Select” key.
• Select “VoIP Settings” and press the “Select” key.
• Select “General” and press the “Select” key.
• Select “Mic Volume” using the “Down key” and press the “Select” key.
Eight volume levels are provided ranging from Level 1 to Level 8.
• Select a volume level and press the “Select” key.
Setting the LCD Sleep Interval
This menu allows you to set the time interval for which the LCD display remains
ON or OFF. To set the LCD sleep interval:
• From the desktop, press the “Menu” key.
• Select “Settings” using the “Down key” and press the “Select” key.
• Select “General Configuration” and press the “Select” key.
• Select “LCD sleep interval” using the “Down key” and press the “Select”
key. Time intervals are provided from 20 seconds to 160 seconds.
• Select a time interval from the list and press the “Select” key.
Turning on the Keypad Light
You can turn on or turn off the keypad light by performing the following steps:
• From the desktop, press the “Menu” key.
• Select “Settings” using the “Down key” and press the “Select” key.
• Select “General Configuration” and press the “Select” key.
• Select “Keypad Light” using the “Down key” and press the “Select” key.
Two options are displayed.
o Off
o ON
• Select “Off ” and press the “Select” key to turn off the Keypad Light.
• Select “ON” and press the “Select” key to turn on the Keypad Light.
Setting the date and the time
You can set the time and the date. PWG-600 displays the date and time on the
screen after the LCD sleep interval if the power on mode is set. If the power on
mode is set as OFF, the screen remains blank after the LCD sleep interval until
PWG-600 remains idle.
Setting the time
The steps to set time are as follows:
• From the desktop, press the “Calendar” key of PWG-600.
• Select “Settings” using the “Select” key. The following submenus appear:
o Set time & date
o Set alarm