User's Manual

PWG-600 User Guide
- 66 -
Connecting to the GPRS Network using a PDA
In order to connect to the GPRS network through the PDA please perform the
following steps:
• Using Bluetooth manager from your PDA, select
the device that you want to connect. Make a
DUN (Dial up networking) connection to that
device. The procedure to make a DUN
connection depends on the Bluetooth card used
and the corresponding software.
• “Bluetooth Connection” screen will be displayed.
• Select the Connection that you created and click
the “ok” button.
A Login Screen is displayed as shown in Fig. 9.12.
• Enter the Username and the Password to login
to the network. The service provider provides
the User Name and the Password.
• Click the “OK” button.
• A screen titled “Connections” is displayed when
you click “OK” as shown.
• Click on the ‘Dialing patterns’ button.