User's Manual

PWG-600 User Guide
- 60 -
• Click on the “Properties” button.
• In the General Tab, connect using
the modem that you installed on the
USB COM port. In the same Tab
click ‘Configure’.
• Unselect all the ‘Hardware features’.
Click ‘OK’. Then again click ‘OK’.
Then click ‘Dial’. The Dial-up
connection is setup.
Note: The procedure is the same while
browsing through WiFi or GPRS.
PDA Functions Using PWG-600
Connecting PWG-600 with a PDA (Personal Digital Assistant)
You can connect a PDA with PWG-600 through Bluetooth. Once connected, you
can perform all PWG-600 functions like making calls, receiving calls, sending
SMS, and receiving SMS.
The steps to connect the PDA with PWG-600 are as follows:
 Using “Bluetooth Manager” on your PDA, attempt to locate (inquire for)
the Bluetooth devices in the vicinity.
• Select PWG-600 from the list of devices displayed.
• Pair the PDA with PWG-600 and enter the PIN when prompted.