User's Manual

PWG-600 User Guide
- 44 -
enable the vibrator. The PWG-600 vibrates whenever an
incoming call is received.
o Ring + Vibr: Select “Ring + Vibr” and press the “Select”
key to enable both the ringer and vibrator. The PWG-600
rings and vibrates whenever an incoming call is received.
o Ring after Vibr: Select “Ring after Vibr” and press the
“Select” key. The PWG-600 rings after the vibrator turns
on whenever an incoming call is received.
Select the desired alert type using the “Up” or “Down” key and
press the “Select” key to activate the alert type.
• Key Beep: Select “On” to activate the key beeping function
whenever a key is press or “Off” to deactivate this function.
o Off
o On
• Profiles: Select “Profile” and press the “Select” key. The
following profiles are displayed.
o General
o Silent
o Meeting
o Outdoor
o Pager
Select the desired profiles using the “Up” or “Down” key and
press the “Select”. Then navigate to the “Activate” and press the
“Select” key to activate the selected profile.
SETTING RING TONE PROFILES
You can activate, personalize and edit a ring tone profile as follows:
1. From the desktop, press the “Menu” key.
2. Using the navigational keys select “Tones”, then press the “Select” key
and the following options appear.
o Ring tone
o Ring Volume
o Alert Type
o Key Beep
o Profiles
3. Select “Profiles”, then press the “Select” key and the following options
appear:
o General
o Silent
o Meeting
o Outdoor
o Pager