User's Manual

PWG-600 User Guide
- 24 -
Alarm Clock
You can set an alarm using PWG-600.
The steps to set an alarm are as follows:
• From the desktop, press the “Calendar” key.
• Select “Settings” using the “Down key” and press the “Select” key.
• Select “Set Alarm” and press the “Select” key.
• If the Alarm Clock has previously been set, a menu with two options will
be displayed.
o Turn Off
 Select this option and press the “Select” key to turn off the
alarm clock.
o Adjust Time
 Select this option and press the “Select” key to adjust the
alarm clock time.
• Select “Alarm Clock” using the “Down key” and press the “Select” key. A
screen titled “Alarm Clock” is displayed showing the previously set alarm
time.
• Press the “Select” key. The following sub menus are displayed when you
press the “Select” key.
o Adjust: Select “Adjust” and press the “Select” key to adjust the
alarm time. A screen titled “Adjust Time” appears when you select
“Adjust”.
 Key in the alarm in hours (and press the “Down” key if only
one digit is being entered in the hours field).
 Key in the alarm in minutes (and press the “Down” key if
only one digit is being entered in the hours field).
 Select “AM” or “PM” and press the “Select” key.
 Press the “Menu/Select” key to set the alarm clock.
o Off: Select “Off” and press the “Select” key to turn off the alarm.
Restore Factory Defaults
You can reset some of the menu settings to their original values.
• From the desktop, press and hold the “Menu” key and reset the device.
• This restores the Factory Default values.