User's Manual

PWG-600 User Guide
- 19 -
Caller Id (VoIP Call Only)
This option allows you to activate the (VOIP) Caller Id facility.
The steps to enable the Caller Id are as follows:
• From the desktop, press the “Menu” key.
• Select the “Settings” option using the “Down key” and press the “Select”
key. The following options are displayed when you select “Settings”:
o General Configuration
o WiFi Settings
o VoIP Settings
o Gsm Settings
o Gprs Settings
o Bluetooth Settings
• Select “VoIP Settings” using the “Down key” and press the “Select” key.
The following options are displayed when you select “VoIP Settings”:
o General
o Call Control
o Profiles
• Select “Call Control” using the “Down key” and press the “Select” key. The
following options are displayed when you select “Call Control”:
o Call Waiting
o Call Forward
o Call Barring
o Caller Id
o Dtmf
o Prefix Dial
• Select “Caller Id” using the “Down key” and press the “Select” key. The
following options are displayed when you select “Caller Id”:
o Disable
o Enable
• Select “Disable” and press the “Select” key to disable the Caller Id facility.
• Select “Enable” and press the “Select” key to enable the Caller Id facility.
Send DTMF tone
You can send a DTMF tone using the Alpha-numeric keys during call progress.
• Enter the number using the Alpha-numeric keys from the keypad and
press the accept key of PWG-600.
• To delete the number entered press the “Back” key. The character to the
left of the cursor is deleted when you press the “Back” key. After all the
characters are deleted, press the “Back” key to go back to the call list.
• Answer a call
Reject a call
Select the contact or the number whose call you want to reject from the call list
and press the reject key. During the incoming call alert (hearing of the ring tone)
press the Reject key to reject a call.