User's Manual

PWG-600 User Guide
- 17 -
“CallerId Calling on VoIP Drop all Calls?”
Press the “Reject” key to drop the calls. Press “Accept” key to answer the
VoIP call. This will also terminate the GSM call.
Note: If calls (GSM/VoIP) are in progress, and there is an incoming call from
another protocol, the vibrator of the PWG units gets activated automatically.
This is to indicate to the user that there is another incoming call from another
protocol.
Call Forwarding (VoIP Call Only)
You can forward a (VOIP) call if you have activated the Call Forward function.
The steps to enable Call forward are follows:
• From the desktop, press the “Menu” key.
• Select the “Settings” option using the “Down key” and press the “Select”
key. The following options are displayed when you select “Settings”:
o General Configuration
o WiFi Settings
o VoIP Settings
o Gsm Settings
o Gprs Settings
o Bluetooth Settings
• Select “VoIP Settings” using the “Down key” and press the “Select” key.
The following options are displayed after you selected “VoIP Settings”:
o General
o Call control
o Profiles
• Select “Call Control” using the “Down key” and press the “Select” key. The
following options are displayed when you select “Call Control”:
o Call Waiting
o Call Forward
o Call Barring
o Caller Id
o Dtmf
o Prefix Dial
• Select “Call Forward” using the “Down key” and press the “Select” key.
The following options are displayed when you select “Call Forward”:
o When Busy
o No Reply
o Unconditional
When Busy: When this option is selected, the call is forwarded to the