User Manual

11Mbps Wireless LAN Mini-PCI Card
Page 14 11Mbps Wireless LAN Mini-PCI Card User's Manual
17. Right click on the Network Neighborhood using the mouse.
18. Select Properties from the pop up menu. The network box appears and you see three main tables:
Configuration, Identification, and Access Control.
19. Click on the Configuration tab and then click on the Add button. Select Network Component Type
box appears. Click on the Protocol the click the Add button.
20. Select Network Protocols box appears. From the list of manufactures, click on Microsoft. From the
list of network protocols list, select NetBEUI, then click OK.
21. The NetBEUI protocol is now installed. After clicking on OK return back to Network Component
Type box.
22. Repeat the step 20 and 21 to add IPX/SPX protocol.
23. Repeat the step 20 and 21 to add TCP/IP protocol.
24. Click on the TCP/IP option for setting the IP address for your computer. You can select either Static
or DHCP setting. If you use the static IP setup then enter the IP value, Subnet masking , DNS,
Domain/ Workgroup name, and Gateway Address values. After setting these parameter
appropriately, click OK to return to Network Component Type and you can select the File and