User's Manual

10
E. Answering a Call
1. Make sure the headset, which has been paired with the Gateway, is powered on, in
stand-by mode and within the working radius of each other.
2. When receive call, you hear a ringing tone in your headset and the Gateway LED indicator
shall blinks red, press the talk button once to answer the call. The Gateway will go off-hook
almost immediately. Gateway LED indicator shall light steady blue while phone call going.
3. When you are done with your conversation, press the talk button on the headset
once to terminate the call, and the Gateway will go back to idle mode.
F. Pairing With Multiple Headsets
The Gateway could be paired with up to four (4) headsets at one time. Headsets that are
paired with the Gateway thereafter would replace those of the previous 4’s, starting with the
first, followed by the second, and so forth. Once paired with the Gateway, headsets could
make calls at freedom any time without having to re-pair again, as long as these headsets,
except those headsets supporting Multi-Device ID Switch(e.g. BTH-101), do not pair with
other Bluetooth devices such as the Bluetooth enabled mobile phones afterwards. Normal
headset without Multi-Device ID Switch function that pairs with another Bluetooth device
after it has paired with the Gateway would have to re-pair with the Gateway before it could
again initiate outgoing calls.