G-SPEED Manual

G-SPEED Product Guide

e 9

8. MANUAL CONFIGURATION

This section will describe how to manually configure

G-SPEED using the web GUI. The G-SPEED employs a very

sophisticated controller with many advanced options. Some

of these options can erase data on the G-SPEED, so be

careful and backup your data if the G-SPEED has been in

use. These operations are identical on MAC and Windows

systems.

8.1 Connecting to the G-SPEED GUI

1. Connect the G-SPEED to your computer or network by

connecting an Ethernet cable from the Ethernet port on the

G-SPEED to your host computer or network.

2. G-SPEED will auto configure to your network or direct

attached computer and display the IP address of the

G-SPEED on the LCD panel.

3. Enter this IP address into a web browser to connect to

the G-SPEED GUI. When the login prompt appears type the

default username “admin” and password “0000”.

Note: See section 10.4 to customize the login username / password

4. After entering the correct username and password the

G-SPEED GUI will appear. There are many advanced

features accessible through the GUI that are not covered in

this manual. Consult your Dealer for more information.