G-SPEED Manual

G-SPEED Product Guide

e 14

9.1 Silencing the Audible Alarm

During a Failure event, the audible alarm is silenced

through the web GUI or by the LCD panel. (to disable

the audible alarm see section 10.1)

1. Silencing Through Web GUI

Select “View Events/Mute Beeper” under the “System

Control” section on the left navigation bar. This will

silence the beeper and open the “View Events” page

with information regarding the failure.

2. Silencing Through LCD Panel

Enter the system through the LCD panel by pressing the

“ENTER” button once. You will be prompted for your

password. Use the UP / DOWN buttons to change the

characters and ENTER button to move the cursor to the right.

For example, using the default password, hit the UP button

once and “0” will appear on the LCD screen. Press ENTER to

move the cursor right and repeat this process until four (0)

zeros are visible. Hit ENTER 12 more times to move the

cursor completely to the right and you will be logged in. Hit

the DOWN button until “Raid System Functions” is displayed

in the window. Hit ENTER and “Mute the Alert Beeper” will

be displayed. Hit ENTER one more time to mute the beeper.

Hit ESCAPE 2 times to exit the system.

10. SYSTEM CONTROL

This section outlines the user configurable options in the

“System Control” section of the G-SPEED web GUI. Clicking

on the links will bring up windows described below.

10.1 Disable Audible Alarm

G-SPEED has an audible alarm that sounds in the event of a

disk drive failure. To disable this alarm select “Disabled” in

the System Beeper Setting pull-down menu as shown below.

We recommend that you leave all other settings in this menu

at the preset values. You must click the “Confirm The

Operation” box and then click on the “Submit” button for

your changes to take effect.

ENTER /FORWARD

DOWN

ESCAPE / BACK