Product manual
p.18
Using RAID Modes
5. A window will appear telling you the conguration is in progress. The next
window will conrm that your G-RAID mini is congured in RAID 1 or 0 mode.
6. Changing the RAID mode of G-RAID mini will require you to re-initialize the disk with
the Disk Utility application. The Disk Insertion dialog below should appear. Click the
Initialize button to launch Disk Utility. Go here for the simple steps to initialize
G-RAID mini for use with Mac.
NOTE: If the Disk Insertion dialog does not appear, go to Application> Utilities and
open the Disk Utility program. Once Disk Utility is open, you are ready to initialize and
partition G-RAID mini for use with Mac.