Installation guide
Table Of Contents
- A Mac utility is provided with G-RAID mini2 to select the RAID mode. Follow the directions below to configure G-RAID mini2 in fail-safe RAID 1 (mirroring) mode.
- NOTE: G-RAID mini ships from the factory in RAID 0 mode.
- /
- WARNING: Changing the RAID level will erase any data stored on G-RAID mini.
- A Windows utility is provided with G-RAID mini to select the RAID mode. Follow the directions below to configure G-RAID mini2 in fail-safe RAID 1 (mirroring) mode.
- NOTE: G-RAID mini2 ships from the factory in RAID 0 mode.
- /
- WARNING: Changing the RAID level will erase any data stored on G-RAID mini2.
G-RAID mini
2
Installation Guide
Note: Alternatively, G-RAID mini can be set up in multiple
volumes by selecting the desired number of partitions from the
Volume Scheme pull-down menu.
5. Click on the <Partition> button. The dialog
box shown below will appear. Click on the
<Partition> button to continue.
6. When partitioning is complete, G-RAID mini
2
will be displayed in the left-hand panel as shown
b e l o w.
7. Exit the Apple Disk Utility.
8. G-RAID mini
2
will be displayed on the desktop
as shown below.
G-RAID mini
2
is now set up for use!!