User's Manual

a. The  Code is an 8-digit code on the back of the drive,  to the QR
code.
b.  the last digit is entered, the app will automatically locate the drive.
7. Three options will popup.
a. Request Access – Your User ID can be scanned by the drive Manager for
access.
b. Use Recovery Key – Restores access to the drive when all other methods are
unavailable. This will also remove all other users/managers from the drive.
c. Erase and Setup as New – The initial setup (name, color, format, etc.) for a new
drive.
8. Click Erase and Setup as New. Then select the Setup options for the drive.
a. Enter the name for the drive.
b. Select the drive format.
- macOS (HFS+) – Time Machine compatible.
- Windows (NTFS) – Standard Windows
 format.
- Windows and macOS (exFAT) – For flexibility between both operating
systems.
c. Choose a color
.
d. Select optional 
- Location tracking -  by  Turn on to  the last known location
where the drive was used and add a map location to each entry.
- User Authentication –
 by  Enables biometrics  face ID, or
passcode) for an additional layer of authentication.
- Auto Firmware Updates – On by
 We recommend leaving this on for
future updates.
e. Click Format Drive.
- The drive will begin
 Do not disconnect the drive or close the app.
9. Save the Recovery Key. A couple options are available for saving.
a. Print – We strongly recommend printing and storing in a safe location. G-
Technology cannot restore your access if you lose your Recovery Key.
b. - Save as PDF – Saves in your computer’s
 system as a PDF.
10.  saving, click Done. Then you will be asked to  that the Recovery Key is
saved, click
.
11. Your computer is now the drive Manager and ready to use.
Getting Started
ArmorLock Encrypted NVMe SSD
User Manual
10