User's Manual

2. Drive Card view: When you click on a drive, a lock icon and drive information will
appear in the Drive Card view.
a. Lock icon – click to unlock the drive.
b. Unlock icon – click to lock and eject the drive.
c. i icon – click to display  view) the drive name, model, serial number,
capacity,  and open source licenses.
d. Gear icon – click to edit the drive
.
e. Map pin – click to show the last recorded location of the drive.
f. Erase icon – click to securely erase and reformat the drive.
g. (Manager role only) ID icon – click to view the list of authorized devices and edit
each role.
h. (Manager role only) Key icon – click to generate a new recovery key and replace
the existing one.
3. Main Menu: The main menu can be accessed at the top of the app window. The
following are the three main submenus and their primary selections (not
exhaustive).
a. ArmorLock
- About ArmorLock – View the ArmorLock version and license agreement.
- Preferences – Set the ArmorLock Username and select to automatically

ArmorLock at Login.
- Services – Services Preferences for your operating system.
b. Drive
- Add Drive – Add an ArmorLock drive to the app.
- Remove Drive – Remove an ArmorLock drive from the app.
c. Share
- Share User ID – Send your User ID to request access to another ArmorLock
drive.
Add a New Drive with the
 App
This section takes you through the steps to add a new drive for the  time. You can
also use these steps to add additional drives to manage with your ArmorLock app.
Setup and Use the Drive
1. Turn on your computer and log-in.
2. Connect the drive to your computer.
a. Note: Connecting the ArmorLock drive to a USB hub is not recommended. If
such a connection is used, a powered USB hub is recommended in order to
supply the appropriate power to the drive.
3. The ArmorLock drive will power on and the LED light under the Lock Symbol will
turn on.
4. Inside the app, there are three ways to add a new drive.
a. List View – click the + Add Drive

b.   corner – click + or – to add or remove drives.
c. Drive Menu – click Drive and select Add or Remove Drive.
5. Click Add Drive.
6. A
 Code window will popup. Enter the drive's  Code.
Getting Started
ArmorLock Encrypted NVMe SSD
User Manual
9