User's Manual

2
 
This chapter provides instructions for downloading the ArmorLock app, connecting to
and  up the ArmorLock encrypted NVMe SSD.
Get the Mobile App
Download and Setup the App
1. Download the ArmorLock app in one of the following ways:
a. Use your phone's camera to scan the QR code located on the back of your
drive
b. Go to GetArmorLock.com/Apps
c. Search for ArmorLock on the App Store
2. Launch the ArmorLock app. The End User License Agreement (EULA) window will
open.
3. Scroll down to read the full agreement, then select Accept.
4. Swipe (or select
) through the ArmorLock intro pages, then select Done.
5. Enter your User Name for the phone, then select Save.
6. The app will then request permission to send
 select Allow. Select
Allow again to proceed.
a. Note:  are  and will help guide you when new actions are
required, such as authorizing new requests to access your drive.
7. ArmorLock is now ready to add a drive.
ArmorLock Mobile App Overview
Getting Started
ArmorLock Encrypted NVMe SSD
User Manual
5