User Manual

p.32 p.33
Maintenance for Your Drive Maintenance for Your Drive
7. Afterthedriveisre-initialized,youshouldautomaticallyseetheTimeMachinedialogbox.
• ClicktheUse as Backup Diskbuttonifyouwanttousethedrivewith
TimeMachine.
• ClicktheDon’t Use or Decide LaterbuttonsifyoudonotwanttouseTimeMachine
atthispoint.
8. QuittheDiskUtilityprogram.Afteryoureinitializethedrive,thecustomiconfor
G-RAIDUSBwillbeerased.Youcanoptionallyrestorethisiconwiththestepsonthenext
page.
Restore the Drive Icon
IftheG-RAIDUSBdriveiconwaserasedduringthecongurationprocess(seetheprevious
section),youcanrestoretheiconwiththefollowingeasysteps.
NOTE: ThisprocessisnotrequiredfortheoperationoftheG-RAIDUSB.However,itwillmake
yourdrive’sappearanceonthecomputerdesktoplookcleanerandmoreaccurate.
1. TogettheG-Technologyiconpackage,gotowww.g-technology.com/support and
navigatetoyourproduct.Therewillbealinktodownloadtheiconsontheproductsupport
page.
2. Oncedownloaded,theG-Technologyiconsfoldershownbelowshouldloadautomatically.
Ifnot,double-clickthezipletoopen.Next,double-clicktheDMGletoopenthe
G-Technologyiconspackage.
3. ClicktoselectthedriveiconforG-RAIDUSBinthepackagewindow.Press Command+C to
copytheicon.