User Manual

p.20 p.21
Using RAID Modes Using RAID Modes
3. OncetheutilityndsyourG-RAIDUSB,thefollowingwindowwillappear.Selectyourdesired
conguration:RAID1(Protected),RAID0(Performance)orJBOD.ThenclicktheCongure
buttontocontinue.
4. Twowarningwindowswillappear,lettingyouknowthatthefollowingstepwilleraseall
yourdata.ClicktheYes buttonstocontinue.
5. Awindowwillappeartellingyouthatthecongurationisinprogress.Thenextwindowwill
conrmthatyourG-RAIDUSBisconguredinRAID1,RAID0orJBODmode.
6. ChangingtheRAIDmodeofG-RAIDUSBwillrequireyoutore-initializethediskwiththeDisk
Utilityapplication.Thediskinsertiondialogbelowshouldappear.ClicktheInitializebuttonto
launchDiskUtility.ThenfollowthesimplestepstoinitializeG-RAIDUSBforusewithMacOS.