User's Manual
p.22
Using RAID Modes
4. A new window will appear to inform you that the conguration is successful. An
Initialization dialog should appear or there is a Disk Utility button which you
can open the Disk Utility window to initialize your disk. Select Done to close the
conguration utility.
5. Changing the RAID mode of G-RAID with Thunderbolt will require you to re-initialize
the disk with the Disk Utility application. The Disk Insertion dialog below should
appear. Click the Initialize button to launch Disk Utility, if you did not open the Disk
Utility from the previous window. Follow the simple steps described in the section
Initialize Drive for Mac to initialize G-RAID with Thunderbolt for use with the Mac OS.