User's Manual

HARDWARE INSTALLATION
1. Shut down the computer.
2. Connect the receiver either directly to the USB port
on the PC.
3. Turn on the PC.
4. Switch on the power of the wireless mouse located
on the backside of the mouse. (Fig. 4)
! CAUTION:
· While traveling, please switch off the unit to save
battery power. (Fig. 4)
Fig. 4
DRIVER INSTALLATION
1. Insert the installation CD into your CD_ROM drive.
2. The CD should automatically load the installation.
Follow through the on-screen instructions to
complete the installation.
3. When the setup is complete, the system will restart
automatically. It will show a mouse icon in the
bottom right-hand corner of the screen.
! CAUTION:
Some computers running Windows 98 will require
insertion of the Windows 98 CD to finish the installation
of the driver.
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com