User's Manual
BATTERY INSTALLATION
1. Press and hold the bottom release tab as you slide the
top cover off. (Fig. 1)
Fig. 1
2. Insert two AAA alkaline batteries. (Fig.1-2)
Fig. 2
3. Replace the top cap and close it.
Fig. 3
! CAUTION:
· Be sure to check polarity (+ or – sign) and insert battery
properly.
· Make sure battery type is AAA alkaline (1.5V).
· Remove the batteries if mouse will not be in use for a
long time.
· Each time you replace the batteries, repeat the mouse
setup by following the “ setup for linkage” (Fig. 5)
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com