User's Manual

- 2 -

SETTING THE CHANNEL

The wireless keyboard and mouse offer 1 channels, CH1. The receiver automatically detects the channel of the mouse nd

keyboard. If interference caused you can change the channel to avoid the interference.

If you want to change the channel of mouse, operations as bellows:

Press the CONNECT key on the bottom of the mouse, then press the CONNECT key on the receiver, then the mouse

and receiver can achieve to change the channel.

Note: every changing should be operated every 6 seconds

OFF ON

If you want change channel of keyboard, operations as follow:

There is a channel switch on the bottom of the keyboard.

If you want to use CH1, you only slide switch to CH1 it will be channel 1.

CHECKING BATTERY POWER

There are a low-power LED on keyboard and mouse. When the batteries are low, the LED will flash, when you should

change new battery or recharge the rechargeable batteries of the mouse.

low voltage indicator

Note: The LED can’t light when the keyboard batteries have no power.

The LED on the bottom of the mouse will be off when the batteries are almost no power. And when you click

the buttons of the mouse every time, the low-power LED will light.

PDF created with FinePrint pdfFactory trial version http://www.fineprint.com