User's Manual
Wireless Keyboard Slim
English - 2 -
1. Remove the battery compartment cover on
the bottom of the cordless keyboard.
2. Insert 2× AAA batteries. A diagram in the
battery compartment shows the correct
installation.
3. Carefully place the cover back into place.
Connecting the receiver
1. Connect the receiver's cable to the USB port of your computer and follow the
instructions displayed on screen.
2. Set up the receiver at least 20 cm away from other electronic devices, such as the
computer monitor or external storage drives to achieve optimum performance.
i
Maintain a distance – even in office environments –
with the keyboard,
mouse and receive
r of at least 5 meter from other radio device to prevent
interference during transmission of the signals.
Setting up the ID wireless link –
Keyboard and Mouse ID wireless link will be set up separately
SLIM KEYBOARD
1. Press the connection button “CONNECT” on the
receiver after booting the system. Indicator RX lights.
2. To set up the keyboard wireless link, press the
RESET button on the bottom of the slim keyboard.
Indicator RX light will be off.
OPTICAL MOUSE
1. Press the connection button “CONNECT” on the
receiver after booting the system. Indicator RX lights.
2. To set up the mouse wireless link, press the
RESET button on the bottom of the mouse. Indicator
RX light will be off.
i
The setup must be completed within 30 seconds. If
setup time exceeds 30 seconds, repeat procedure.
Change communication code
CHRG
CONNECT
RX
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com