PDF created with FinePrint pdfFactory trial version http://www.fineprint.
Wireless Keyboard Slim Wireless radio keyboard and radio mouse The wireless keyboard and optical mouse operate with digital radio technology. There is no connecting cable to hinder communication between the keyboard, the mouse and your computer. The keyboard and mouse need not be in the line of sight to the receiver. The keyboard and mouse use radio frequencies to send data to the receiver, which forwards these to your computer.
Wireless Keyboard Slim 1. Remove the battery compartment cover on the bottom of the cordless keyboard. 2. Insert 2× AAA batteries. A diagram in the battery compartment shows the correct installation. 3. Carefully place the cover back into place. Connecting the receiver 1. Connect the receiver's cable to the USB port of your computer and follow the instructions displayed on screen. 2.
Wireless Keyboard Slim The desktop has communication code to the computer to avoid the interference with other desktop. You have to change the code if there is any interference. The interference only exists when many sets of mouse & keyboard used at the same time. Keyboard and Mouse ID wireless link will be changed separately. SLIM KEYBOARD 1. Press the connection button “CONNECT” on the receiver, Indicator RX lights. 2. Press the “ RESET” button on the bottom of the slim keyboard.
Wireless Keyboard Slim battery is fully recharged. 4. The recharge power is available during the power off state of the computer, only if the input electricity is available. Installing the software To take advantage of all the features of your mouse and keyboard, please install the software that comes with the product. The software provided offers you several advantages: − Activation of the multimedia keys of your keyboard and operating display on the screen when the multimedia keys are pressed.
Wireless Keyboard Slim scrolling, e. g. in documents or on Internet pages. − For scrolling in documents turn the wheel forward or back. − To use the wheel like a standard mouse button, click (press down) on the wheel. You can specify further settings in the mouse software. i If you do not use the mouse for several minutes it will be put into a suspended state. For using the mouse again move the mouse or press one of the mouse buttons. Multimedia keys The keyboard has several additional function keys. 1.
Wireless Keyboard Slim Use this key to start the standard e-mail programme for your system. Energy management The following description of the keys applies to the operating systems that support ACPI (Advanced Configuration and Power Management Interface), such as Windows 98 SE or higher. Standby mode Depending on the settings in the operating system the computer switches into the energy-saving mode (Standby). Wake-Up Use this key to deactivate the energy-saving mode.
Wireless Keyboard Slim Cleaning the keyboard and the mouse Use disinfectant wipes to clean the keyboard and the mouse. i Switch off the computer or disconnect the cable between the receiver and the computer and remove the batteries from the mouse before you clean the mouse. Optical mice normally do not need to be cleaned. However, if you have problems with the pointer movement, check whether the mouse is dusty or dirty on the underside. If this is the case, clean the lens with a cotton swab.
Wireless Keyboard Slim Keyboard missing-keys 1. Make sure whether the batteries are out of power or expired, Ref: Checking the battery power. 2. Place the receiver at least 8 inches or 20 centimeters away from other electronic devices, such as the computer monitor or external storage drives. 3. Shorten the distance between keyboard and receiver. Mouse & keyboard mistaken operation Mistaken operation seldom happens, because the mouse & keyboard have their own code automatically after batteries installed.
Wireless Keyboard Slim in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
