User's Manual

Wireless Keyboard Slim

English - 2 -

The cordless keyboard uses 2×AAA batteries.

1. Remove the battery compartment cover on

the bottom of the cordless keyboard.

2. Insert 2× AAA batteries. A diagram in the

battery compartment shows the correct

installation.

3. Carefully place the cover back into place.

Connecting the receiver

1. Connect the receiver's cable to the USB port of your computer and follow the

instructions displayed on screen.

2. Set up the receiver at least 20 cm away from other electronic devices, such as the

computer monitor or external storage drives to achieve optimum performance.

Maintain a distance – even in office environments – with the keyboard,

mouse and receiver of at least 5 meter from other radio device to prevent

interference during transmission of the signals.

Setting up the ID wireless link

–

Keyboard and Mouse ID wireless link will be set up separately

SLIM KEYBOARD

1. Press the connection button “CONNECT” on the

receiver after booting the system. Indicator RX lights.

2. To set up the keyboard wireless link, press the

RESET button on the bottom of the slim keyboard.

Indicator RX light will be off.

OPTICAL MOUSE

1. Press the connection button “CONNECT” on the

receiver after booting the system. Indicator RX lights

2. To set up the mouse wireless link, press the

RESET button on the bottom of the mouse. Indicator

RX light will be off.

The setup must be completed within one minute. If setup time exceeds one

minute, repeat procedure.

CHRG

CONNECT