User's Manual

2
SETTING UP THE ID WIRELESS LINK
Set up your Keyboard and Mouse ID wireless link separately.
Slim Keyboard
1. Press CONNECT key on the receiver after booting the system. The green LED inside
the connect key will light on.
2. To set up the keyboard wireless link, press CONNECT key on the bottom of
the slim keyboard. The green LED will go off.
A
1
pic.3
Optical mouse
1. Press CONNECT key on the receiver after booting the system. The green LED inside
the connect key will light on.
2. To set up the mouse wireless link, press CONNECT key on the bottom of the mouse.
The green LED will go off.
A
1
pic4
Note: The setup must be completed within one minute. If the setup time exceeds one
minute, repeat the procedure.
SETTING CHANNEL
The wireless optical mouse and multimedia keyboard offer 2 channels, CH1 and CH2.
Interference can be removed by adjusting the channels. The operation of setting channels
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com