User's Manual

Cannot be connected to a
device that has been paired and
connected before.
- When using this unit as a transmitter, this
unit tries to connect with either of the last
two devices recognized before. If this unit
cannot make the BLUETOOTH connection
with a paired device, pair the device again, or
try making the BLUETOOTH connection
from the BLUETOOTH stereo audio
receiving device if possible.
- Pairing information may be deleted. Pair the
device again.
Common
Sound skips or the
correspondence distance is
short.
- If a device that generates electromagnetic
radiation, such as a wireless LAN, other
BLUETOOTH device(s), or a microwave
oven is nearby, move away from such
sources.
-
Remove any obstacle between this unit and
other BLUETOOTH device or move away
from the obstacle.
- Locate this unit and other BLUETOOTH
device(s) as near as possible.
- Re-position this unit.
- Re-position other BLUETOOTH device.
Pairing cannot be done.
- Bring this unit and the BLUETOOTH device
closer together.
- check the pair LED status, please refer to the chapter
“on indicators”.
Sound is delayed.
- If you watch a TV or a DVD through
BLUETOOTH connection via this unit,
sound may lag behind the picture.
Low power checking
If you found the below status occurred, you should
recharge the unit at once.
- when you press the power button, the power indication
doesn’t light green.
14