User's Manual

Using the stand

Attach the supplied stand to install this unit vertically.

Recharge the unit

The unit is powered by Li-ion battery inside, so you can recharge it with supplied

USB cable or AC adapter.

If it is almost no power, the power LED will flash red, recharge it please follow the

steps below.

Plug the USB cable

Plug one end of the USB jack into the receiver, and insert the other end to a

USB port of your PC.

Or plug the power adapter

Plug one end of the USB jack into the receiver, and the other end into the

power adapter.

When it is being charged, the power LED keeps lighting red. If it is fully

charged, the power LED will turn green.

Note:

-Your pc or power is on,

- Before the first use, charge the battery fully for about 10 hours. Thereafter,

recharging fully takes about 4 hours.