Bluetooth Audio Adapter (Transmitter / Receiver) Operating Instructions Model No.
WARNING To reduce the risk of fire or electric Disposal of Old Electrical & shock, do not expose this unit to rain or moisture. Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) To reduce the risk of electrical shock, do not open the unit by yourself. Refer servicing to qualified personnel only. To reduce the risk of fire or electric shock, do not place objects filled with liquids, such as vases, on the unit.
Table Of Contents Features ................................................. 3 Unpacking ............................................. 3 Location and Function of Parts .................................................... 4 Using as a Receiver .................. 5 Preparation .........................................… 5 Pairing .............................................…... 6 Using the supplied earphone ...............…7 To finish receiving.............................…... 7 Using as a Transmitter ......
Features This unit is an audio adapter which can be used in two ways: as a stereo wireless receiver or transmitter, using BLUETOOTH wireless technology. You can enjoy stereo audio signal transmission (receive/transmit) of the BLUETOOTH wireless technology by using your stereo audio devices. This unit is powered by rechargeable Li-ion battery, and can be recharged by supplied USB cable and AC adapter.
Location and Function of Parts 1. Switch: Switch between “Tx” and “Rx” Tx: use as transmitter Rx: use as receiver 2. Power button: Press and hold it, power on or power off. 3. Pairing button: When the power is on but the pairing indication is off, press the pairing button and let it enter paring mode. 4. Power indication: When it is on, the power indication will light green. When it is off, the power indication will be off. When it is low power, the power indication will flash RED.
On indicators ” indicator Status “ Power on lights green Power off off Low power flashes red Charging lights red Fully charged turns green Status power on power off connecting “ ” indicator lights blue off flashes blue Use as a receiver This unit can receive stereo audio signal from a BLUETOOTH stereo audio source device (mobile phone, digital music player, etc.) *.
2 Set the TX/RX switch to “RX.” 3 Power on Press and hold the “power” button, the power indication lights green. If it failed, it means the unit has no power, you should recharge it, please refer to the chapter “recharge the unit”. Pairing Check the following before operating the unit. The Tx/Rx switch is set to “Rx”. This unit is powered on. 1. Press and hold the “ “ button” for 2 seconds or more. ” indicator lights green and “ ” indicator lights blue, release When the “ the button.
5. 6. Start the BLUETOOTH connection from the BLUETOOTH device. Some BLUETOOTH stereo audio source device may connect with the unit automatically when pairing is completed. When the BLUETOOTH connection is made properly, indicator (blue) flash indicating that pairing is completed, and pairing information is memorized on this unit. Start playing on the BLUETOOTH stereo audio source device. For the details, please refer to the manual of your BLUETOOTH audio source device.
Using as a transmitter This unit can transmit stereo audio signal to a BLUETOOTH stereo audio receiving device (speaker, car audio unit, headset, etc.) *. By converting a regular stereo audio signal input (analogue) from the connected stereo audio source device to digital stereo audio signal and transmitting it wirelessly, you can enjoy listening to the music of your stereo audio source device connected to this unit (computer, portable audio player, mobile phone, etc.).
2. set the Rx/Tx switch to “Tx” 3. Power on Press and hold the “power” button, the power indication light green. If it failed, it means the unit has no power, you should recharge it, please refer to the chapter “recharge the unit”. Pairing Check the following before operation the unit. The Tx/Rx switch is set to “Tx”. This unit is powered on. BLUETOOTH stereo audio receiving device(not supplied) is powered on. 1. Press and hold the “ ” ” button for 2 seconds or more.
Using the stand Attach the supplied stand to install this unit vertically. Recharge the unit The unit is powered by Li-ion battery inside, so you can recharge it with supplied USB cable or AC adapter. If it is almost no power, the power LED will flash red, recharge it please follow the steps below. Plug the USB cable Plug one end of the USB jack into the receiver, and insert the other end to a USB port of your PC.
On Pairing What is pairing? BLUETOOTH devices need to be “paired” with each other beforehand. Once BLUETOOTH devices are paired, there is no need for pairing again, except in the following cases: • Pairing information is deleted after repair, etc. • This unit is paired with 7 or more devices. This unit can be paired with up to 6 BLUETOOTH stereo audio receiving device and transmitting device.
OP What is BLUETOOTH technology? ER BLUETOOTH wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a ATI computer or digital camera. BLUETOOTH wireless technology operates within a NG range of about 10 meters (about 30 feet). Connecting two devices as necessary is common, but some devices can be connected to multiple devices at the same T time.
Troubleshooting If you run into any problems using this unit, use the following checklist. Should any problem persist, consult the service. When using as a receiver When using as a transmitter No sound No sound - Check the connection between this unit and - Check the connection between this unit and the stereo audio output device connected to this unit. - Check that both this unit and the BLUETOOTH stereo audio source device are turned on.
Cannot be connected to a device that has been paired and connected before. - When using this unit as a transmitter, this unit tries to connect with either of the last two devices recognized before. If this unit cannot make the BLUETOOTH connection with a paired device, pair the device again, or try making the BLUETOOTH connection from the BLUETOOTH stereo audio receiving device if possible. - Pairing information may be deleted. Pair the device again.
Specifications General Communication System BLUETOOTH Specification version 1.2 Output BLUETOOTH Specification Power Class 2 Maximum communication range Line of sight approx. 10 m (30 ft)*1 Frequency band 2.4 GHz ISM band Modulation method FHSS Compatible BLUETOOTH Profile*2 A2DP (Advanced Audio Distribution Profile) Supported Codec Receive: SBC Transmit: SBC Audio input Stereo mini jack 1 Audio output RCA jack 1 Power supply Standard Li-ion battery inside, 350mAh Rating: 3.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.