User's Manual

Table Of Contents

7. Troubleshooting

If the Bluetooth Stereo System does not work, try the following:

Ensure your mobile or PC was built - in BLUETOOTH A2DP profile.

Check the operation distance.

Power off the receiver and reconnect again and ensure the right

paring password 0000 .

Check whether other Bluetooth device is connected.

Check whether the system is out off power.

Check whether the system is connected correctly.

Check whether Bluetooth function of device is turned on.

Operating frequency band: 2.4 to 2.48GHz unlicensed ISM band

Bluetooth specification: V1.2

Output power class: class 2

Transmission power: +3dbm to -20dbm

Maximum data rate

Asynchronous: 723.2/57.6kbps

Synchronous: 433.9/433.9Kbps

Operation temperature: -40 to +85 degrees

Receiving signal range: -83dbm to -20 dbm

Receiving sensitivity: -83 dBm 0.1% BER

Storage temperature: -40 to +105 degrees

Transmit power consumption: 46mA

Power supply: Standard Li-lon battery, 350mAh Rating: 3.7V 5vdc

50 100mA

8. Specifications

Pairing code: 0000

Only use the USB cable and net adaptor supplied.

Physical Specification: Dimension: 62 mm x 42 mm x 12 mm

This device complise with Part 15 of the FCC Rules. Operation is subiect to

the following two conditions:(1)this device may not cause harmful

interference, and (2)this device must accept any interference

received,including interference that may cause undesired operation.

Note THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR

TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS

EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY

TO OPERATE THE EQUIPMENT.

9. Caution:

Bluedio is a trademark owned by G.Tech Technology Ltd.

Other product names used in this quick guide are the properties of their

respective owners and are acknowledged.