Users Manual

DSS (DUAL SPEAKER STEREO)
With DSS, you can connect two G-MEGAs together to stream in stereo to both at the
same time to enjoy music with double the power and expanded stereo separation.
1 Power on two G-MEGA speakers and switch both to Bluetooth mode.
2 Follow directions to pair and connect a Bluetooth device to one G-MEGA (master)
3 Press DSS button on the master G-MEGA which is already connected to a Bluetooth device
to enter DSS mode, the DSS LED indicator and LED lighting logo will ash amber.
4 Press DSS button on the other G-MEGA speaker to enter DSS mode, the DSS LED indicator
and LED lighting logo will ash amber. When the two speakers are connected, the amber
DSS LED indicator and LED lighting logo will change from ashing to solid.
5 To disconnect the DSS, press the Bluetooth PAIR Button on one G-MEGA.
6 Repeat the above steps to re-connect the two G-MEGA.
NOTES:
- DSS mode requires two G-MEGA speakers.
- You need to connect a Bluetooth device to the master speaker before you enter DSS mode.
- After connected the two speakers, the volume level in these two speakers will be synchronized.
and the EQ can be individually set for each speaker.
- If you cannot connect two speakers successfully, press and hold the DSS button for 3 seconds on
both G-MEGA to reset memory and then repeat the above steps to connect two speakers again.
- Only Bluetooth can work with DSS. LINE-IN and LINE-IN MIX MODE do not work with DSS.