Users Manual

Operating Manual Smart Weather Sensor
G. Lufft Mess- und Regeltechnik GmbH, Fellbach, Germany 69
14.1 FCC Compliance Statement (US)
Product: Smart Weather Sensor
Productname
Part#
FCC
WS100-UMB
8367.U04
This device contains FCC ID: UF9WS100
WS800-UMB
8381.U01-NA
FCC ID: UF9-WSX00
WS700-UMB
8380.U01-NA
FCC ID: UF9-WSX00
WS600-UMB
8370.U01-NA
FCC ID: UF9-WSX00
WS400-UMB
8369.U01-NA
FCC ID: UF9-WSX00
This device complies with 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
This device complies with part 18 of the FCC rules.
User Information according to §18.213 of FCC rules:
This device could interfere with other ultrasonic or radar devices working on the same
frequency range (290-310kHz ultrasonic or 24GHz radar), especially when using more than
one weather station at the same spot. This could lead to wrong measurement data of wind or
rain of the weather station.
In case of interference please try to place the devices at least 3m apart from each other.
If high emitting devices used next to the weather station, such as inductive ovens, the
distance probably needs to be larger.
Note: Do not use in areas where safety critical radar applications are installed!
For maintenance it is sufficient if the user is regularly cleaning the radar dome, gently
cleaning the ultrasonic transducers and checking if the fan and ultrasonic area is free from
obstacles.
Changes and modifications not expressly approved by manufacturer could void the user’s
authority to operate the equipment.