User manual

8
Attention- important:
The adapter and packaging contain parts which must be stored out of the
reach of children.
Test the Smart Shoot Adapter at the shooting range before using it when hunting.
Check that the use of the Smart Shoot Adapter does not have a negative effect
on the function of the weapon.
When shooting with the Smart Shoot Adapter the recoil of the weapon must be
observed - a minimum distance of 15 cm must be maintained.
Since the assembly of the Smart Shoot Adapter is carried out by the user, in
the event of damage no claims can be asserted based on incorrect use or
assembly errors. (personal and material damage)
No damages occurred to the smartphones or scopes used during the tests we
conducted.
In order to minimise damage to the smartphone caused by recoil when a shot
is fired, the weapon and ammunition should be coordinated.
As a rule of thumb: a “heavy” weapon with “normal” ammunition has less recoil
than a light weapon with the same ammunition.
This adapter should not be used on large calibre guns with a high propelling
charge, e.g. an “elephant gun”.
In order to get an optimum view of the target, the scope should be mounted on
the weapon approx. 10-12 cm from the rear end.
Care: Wipe only with a damp cloth and leave to dry. Oiling or lubrication is not ne-
cessary. Do not use any strong cleaning substances which may damage the sur-
face or parts of the product.
Guarantee
We grant on this product a guarantee of 24 months, according to the pertinent statutory regula-
tions, from the date of the purchase by the initial user.
This guarantee covers all material or production defects; however, it does not cover the follo-
wing: Faults and defects resulting from normal wear, including wearing parts, seals etc.; dama-
ges or defects arising or as a result of alteration.
We reserve the right to reject a guarantee claim if the purchase cannot be proven, or if the pro-
duct was improperly serviced or was obviously erroneously maintained (not or insufficiently
maintained; cleaning and servicing).
Please retain the proof of purchase documentation because this is valid as proof of date of pur-
chase.
In case of a guarantee claim, the machine must be returned to the dealer in a clean state, and in
its original packaging if possible, and not disassembled in any way. Proof of purchase must also
be included.
Copyright by
All rights reserved. It is not permitted without written approval from Berger + Schröter to repro-
duce these operating instructions. It is also not permitted to reproduce extracts in any form that
have been created or processed by use of electronic, mechanical or chemical procedures. Tech-
nical changes can be made at any time without prior announcement. The operating instructions
are corrected regularly. We assume no liability for technical and typographical errors and their
results.