True Bypass Wah-Pad User Manual Instrukcja obsługi Bedienungsanleitung
Edition 1.1 Dear Customer! Thank you for choosing our product. The True Bypass Wah-Pad (TBWP) is the device eliminating necessity of using a switching solution of a typical wah-wah effect. It assures also true bypassing the wah-wah effect circuit when it is not used.
1 - return signal connector 6 - guitar input (IN) connector 2 - area of placing wah-wah effect 7 - Indicator of wah-wah effect 3 - output (OUT) signal connector activation (ACTIV) 4 - 9V DC power supply connector 8 - send signal connector 5 - signal indicating foot placement (SEN) connector 2 9 - wah-wah effect 9V DC power supply connector
Connecting the TBWP 1. - Place inside the TBWP cabinet a battery and connect it (see the point “Battery exchange”). 2. - Place the wah-wah effect on the wah-pad and connect signal and power supply connectors (please check if the power connector polarisation is proper).
3. - Connect the guitar to the TBWP input IN (plugging in the mono Jack connector will cause in switching on the power supply of the TBWP and the wah-wah) and the cable from the amp to the TBWP output OUT (see the diagram from the page No. 1). 4.
Switching on and off the power supply Switching on the power supply is done by plugging in the guitar cable connector into the IN TBWP input and switching off the power supply is done by unplugging this connector. It should be used mono Jack connector to plug into IN input. Power supply To supply the TBWP should be used internal 9V battery or regulated 9V DC external power supply adapter. Make sure that the connector of the external power supply adapter has got the proper polarisation.
Battery exchange To exchange the battery you should make less tight two holding screws and to remove (taking off) the cover (see the picture).It is recommended to use high capacity alkaline batteries. Fixing of the TBWP and the wah-wah effect Fixing the TBWP with the pedalboard can be done by screwing it (see the picture) or by stacking with the industrial velcro (3.5 mm or higher).
To eliminate movement of the wah-wah effect over the pad, you should stick movement limiters (adhesive elements supplied inside the package) on the upper surface of the pad’s plate (close to the wah-wah effect legs – as shown on the picture). To fix the wah-wah effect we suggest to unscrew the legs and use the industrial velcro.
Specification 8 Dimensions (depth x width x height) 301 x 104 x 55 mm Weight (with battery) 840 g Power supply 9V DC (regulated) Power consumption 3 mA
Package content 1 - True Bypass Wah-Pad TBWP 2 - 9V Battery 3 - Blocking ring 4 - 8 Pieces of self-adhesive elements 5 - 4 Sets of industrial velcro 6 - User Manual 7 - Warranty Card 9
EMC/EMI & Certificate of conformity EMC/EMI This device has been designed and manufactured to conform with directives and standards in the field of safety operations and electromagnetic interference. This device uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However in spite of performing below standards there is no guarantee that interference will not occur in a particular installation.
Certificate of Conformity ELZAB S.A., ul.
DO NOT PLACE THIS PRODUCT INTO THE WASTE CONTAINER ! This device is marked with a cross-lined waste container symbol according to 2002/96/EU Directive on Waste Electric and Electronic Equipment. Such marking informs that after usage equipment can not be trashed together with other household waste. An user obligation is to return wasted equipment to a party collecting wasted electric and electronic equipment.
COMPANY ADDRESS ELZAB S. A. ul. Kruczkowskiego 39, 41-813 Zabrze, Poland phone +48 32 272 20 21, fax +48 32 272 81 90 Web site ................................................................. www.glab.com.pl Export Department ................................................ phone +48 32 272 30 51 inter. 34, +48 32 272 20 21 inter. 366 e-mail: rydygier@elzab.com.pl Technical Support .................................................. phone +48 32 272 26 23 +48 32 272 20 21 inter. 419, 220 e-mail: help@glab.
