User manual

Scheme and signal path description

M2L has true passive signal path (without signal boosting and buffering

elements). Owing to this the M2L doesn’t influence the guitar tone (doesn’t

change the tone and doesn’t cut the signal). It is recommended to use the

switcher button to exclude from the effects’ signal path the effects without

true bypass function. Controlling by MIDI provide galvanic separation from

controlling device. It is recommended to use 9V DC from separated source.

Every time after switching on the power supply both effect loops are switched

off and the signal path is “opened”.

Manual loops switching

To manual loops switching there are used two buttons signed LOOP1

and LOOP2. To switch on/off the loop press corresponding button.

MIDI channel setting

To set the MIDI channel use the rotatable knob signed as MIDI

CHANNEL. To switch the channel use the small screwdriver to turn smoothly

central part of the switcher to the right or to the left. The arrow-head indicates

set channel (letter A, B, C, D, E, F correspond successively with the channel

numbers 10, 11, 12, 13, 14, 15, and number 0 indicates channel 16).

Controlling via MIDI commands

M2L can by controlled by Program Change commands. DS1 micro switch

serves to choose the digit in Program Change commands that should be

considered by the M2L.

DS1=ON

– received is the decimal digit of program number (units’ digit

is ignored)