User's Manual

- Loud commercials: many commercials have an higher average volume that the regular TV
program. With TotalVolume you don’t need to adjust the TV volume before and after
commercials.
- Movies: when watching a movie from a DVD or Bluray, the audio is edited for movie theaters.
This means the differences between quiet and loud passages are very high. With TotalVolume
you don’t need to adjust the volume during the movie.
- Nighttime TV watching: when watching TV at lower levels (for example at night), it is very
difficult to understand quiet conversations. With TotalVolume you such parts are closer to the
average volume, it will not be necessary to adjust the volume anymore.
Check text with TotalVolume.
Voice enhancement
The feature helps you to understand conversations better. Press (VOICE) to turn this function on
and off.
Total Volume and voice enhancement improve your audio experience in TV mode. They are not
supported in Bluetooth or Line-in.
Bluetooth
Mobile phones and computers with Bluetooth can connect to the Geneva Cinema and play
music. The mobile phone or computer must support Bluetooth A2DP.
Initial Setup (“Pairing” ) with iPhone®
1.Press the B key on the remote control. Wait for 20 seconds until the display shows a blinking
“PAIR”.
2. Select “Settings” on your iPhone
®
. Select “General / Bluetooth”. Turn on Bluetooth. New
Bluetooth devices are discovered automatically. After a few seconds “CINEMA ( Not Paired )” will
appear.
3. Select “CINEMA”. The phone is now connecting ( “Pairing” ) to the Geneva Cinema.
4. Now you can play music on an iPhone
®
and listen to it on the Geneva Cinema.
Bluetooth settings on the iPhone®
Settings on iPhone
®
Playing
Status information on the display
“SRCH”: Searching previously paired devices.
“CONNECTED”: Connection successful.
“PAIR” : If the Geneva Cinema did not make a successful connection within the first 20
seconds, it will go into the pairing mode for 2 minutes.
Playing Music
Most phones connect automatically to the Geneva Cinema after the initial setup ( “Pairing” ).
1. Press the B key on the remote control. While the Geneva Cinema XL connects, the display
shows “CONNECTED” for a few seconds.
2. Now the music that is playing on your mobile phone will automatically be streamed to the
Geneva Cinema.
Pairing guides for other devices and mobile phones
Go to www.genevalab.com and select “Support.”
Geneva Cinema - Manual Page