User's Manual

Connector Details
AC power input 100 - 240 V AC, 50/60 Hz
TV audio input / Analog Analog audio input (stereo), RCA connectors
TV audio input / Coaxia Digital audio input (stereo), coax/SPDIF
TV audio input / Optical Digital audio input (stereo), optical/TOSLINK
Line In Analog audio input (stereo), 3.5mm connector
TV
Press TV on the remote control to listen to audio from the TV. The Geneva Cinema selects
automatically the correct audio input from the three different TV inputs.
Changing the volume
There are two ways you can control the volume:
I) Use the volume controls of the Geneva Cinema remote control.
II) Using the volume control of your TV settop box or satellite receiver. In this case, select a good
maximum volume with the Geneva Cinema remote control, and afterwards keep using the settop
box remote control.
Automatic powering on
If your TV is turned on, the Geneva Cinema will automatically power itself on, as soon there is
an audio signal on one of the three TV inputs connectors.
Automatic powering off
The Geneva Cinema will automatically turn itself off after 15 minutes if there is no active
Bluetooth connection, or if there is no audio signal at the TV inputs or the Line-in connectors.
Manually selecting the TV audio input
If you hold (TV) for a few seconds, then you can select the three different TV inputs manually. If
you select “AUTO”, the automatic selection is turned on again.
AUDIO
Total Volume®
Pressing (Total Volume) turns the Total Volume functionality on and off. Total Volume is a
patented audio technology making watching TV more enjoyable in the following situations:
Geneva Cinema - Manual Page