User's Manual

The green( ) LED lights up.
Wi-Fi connection
D2. Wi-Fi connection
Stand by until the boot is complete.
2
Look for the four-digit code on the label
on the bottom of the device.
3
Run the app, enter the 4 digit code and
press the device search button.
4
Wi-Fi mode power LED
SSID: Borescope_XXXX
CODE: XXXX
Wi-Fi mode power button
Press the button for 3 seconds.
1
If you check Auto setup after remembering your password,
the code is saved to simplify the connection process.
When booting is complete, the LED blinks blue
and green( ).
Once the device is detected, press the
Connect button to connect.
5
It shows that you are connected to Wi-Fi at the top.
(Displays battery information and SSID of the device
together.)
6
hen the Wi-Fi is connected, it moves to
the shooting screen.
KA981121312449231
12/08/2019
11