Borescope GBS-101 User Manual
Notice on patent, trademark, copyright, copyright and intellectual property rights in user manual Patents, trademarks, copyrights, copyrights, and intellectual property rights of this user manual are owned by GIT. No part or all of this manual may be reproduced or used in any form without written permission of GIT. Purchase of this user manual does not imply a transfer of patent, trademark, copyright, copyright, or intellectual property rights.
A. Warning and cautions for safety before use ! [WARNING] The user is responsible for any damages incurred due to insufficient knowledge of the contents of this endoscope user manual or the operation used differently from the contents of this manual. When connecting with a DC charger, do not use any charger other than the specified DC charger. Make sure all cables are connected properly during operation. Do not disconnect the data cable or power cable without completing the operation.
B. Basic components 품목 외형 설명 Main body The main body connects the camera and the flexible tube Perform the endoscope function. 0˚ Camera 0 degree camera used for frontal shooting. 90˚ Camera 90 degree camera used for side shooting. Flexible tube The probe connects to the body and the camera. 0˚ Magnetic holder It can be mounted in the camera lens groove to lift a small bolt or screw. 90˚ Magnetic holder It can be mounted in the camera lens groove to lift a small bolt or screw.
C1.
C2. Product assembly 1 Insert the flexible tube into the body and screw it to fix it. Make sure the groove or arrow is pointing up when inserting the tube. Check the direction of the arrow and groove 2 Insert the camera on the other side of the flexible tube and turn it to fix it. Make sure the red circle is aligned when inserting the camera.
C3. Product charge This product requires charging because it consumes its own battery when wirelessly used. USB connection is available without charging. 1 Connect the DC cable to the 5V 2A charger. DC cable 2 Remove the waterproof cover on the back of the main unit and connect the DC cable to the DC input terminal.
D1. USB connection 1 If the Wi-Fi power is on, press the power button to turn it off. Wi-Fi power must be off to enter USB mode. Wi-Fi mode power LED Micro USB cable Wi-Fi mode power button 2 Connect the micro USB cable. 3 Connect the other end of the cable to your tablet.
4 Run the GDSM / KDS app on your tablet. 5 Automatically try to connect to USB. 6 When USB is connected, it moves to the shooting screen. KA981121312449231 12/08/2019 상단에 USB 접속 중임을 표시하고 있습니다. 7 Start shooting with the button. 8 If the USB connection fails, reconnect the USB cable. LED brightness adjustment Preview screen rotation Capture button Long press: Start / stop video recording Short press: Take a picture 10 USB connection status The LED lights up blue( ).
D2. Wi-Fi connection 1 Press the button for 3 seconds. Wi-Fi mode power button 2 Stand by until the boot is complete. When booting is complete, the LED blinks blue and green( ). Wi-Fi mode power LED 3 Look for the four-digit code on the label on the bottom of the device. 4 Run the app, enter the 4 digit code and press the device search button. SSID: Borescope_XXXX CODE: XXXX If you check Auto setup after remembering your password, the code is saved to simplify the connection process.
E1.
E2. Taken image Record the vehicle's VIN and date when taking photos and videos. KA981121312449231 12/08/2019 ※ File storage location: Internal storage/mvci/GDSCAM/Record Date VIN E3.
F1. Note Mode 1 Select button on the shooting screen. 2 Once the Mode at the bottom is activated, you can draw on the photo. KA981121312449231 12/08/2019 KA981121312449231 12/08/2019 Text box Pen mode Pen thickness 3 When mode is activated as below, you can display the text on the photo Delete all Pen color Redo Undo 4 Long press on the photo to enter text in the textbox. KA981121312449231 12/08/2019 Text color 5 Press button again to finish writing.
F2. Image editing 1 To edit the photo, select button 2 The recorded picture is displayed. Select the picture you want to edit. on the screen. 3 Edit the photo using the pen or text box. 4 Press the ‘SAVE’ button to save. When saving, you can save it with a different name. F3. Screen rotation 1 Select button to rotate the preview screen by 90 degrees. F4. LED brightness adjustment 1 Press the LED brightness button on the device to adjust the brightness.
G1. Resolution setting 1 You can adjust the resolution by selecting the Settings button on the shooting screen. 2 This product supports three resolutions. (640X480,800X600,1280X960) KA981121312449231 12/08/2019 G2. Sleep mode setting 1 You can turn sleep mode off or on by tapping the tab in the Settings pop-up. 2 If there is no operation for a certain period of time, power save mode and sleep mode are activated. Power save mode: The Sleep Mode activates after 10 minutes of inactivity.
H. Internal battery replacement 1 Turn the rear screw counterclockwise with a screwdriver. 2 Remove the screw and detach the battery cover on the handle part downward. 3 Remove the rechargeable battery and replace it with a new one. Close the cover in the reverse order and secure it with the screw.
I. Product specification 18 Item The details Camera 2EA [Front(0°), Side(90°)] Resolution C-MOS [640X480,800X600,1280X960] Lens Angle of view: 67°/ Iris: F2.8 None AF/Anti-fog coating Focal length 9.5~300 mm LED White Chip LED 6EA Outer diameter Camera Head Ø8.2 Camera Joint Wire Ø8.
J1. Certification ※ This wireless device is likely to be radio wave involved during operation. This device complies with part 15 of FCC Rules. Operation is subject to the following two condition: (1)This Device may not cause harmful, and (2)This device must accept any interface received, including interface that may cause undesired operation.
J2. Product warranty [Purchase information] Product name GBS-101 S/No. Purchase date (1 year warranty) [Customer information] Company Name Name Phone number Address ※ Free service After purchase, you are entitled to free service only if the product malfunctions within the warranty period (see below). If the date of purchase cannot be confirmed, the warranty period will be calculated from the headquarters release date +90 (product shelf life).
www.gitauto.
