User's Manual

20
21
English
English
Stamp:
(Yes/No)
Select or cancel imprinting date, time,
temperature and moon phases on photos.
Full moon:
New moon:
First quarter:
Last quarter:
Resolution:
(High/Medium/
Low)
Set the photo resolution.
High: 10 MP
Medium: 5 MP
Low: 3 MP
Temperature:
(°C/°F)
Select the temperature display in °F or °C.
Continuous:
(Yes/No)
Allow the user to take pictures or videos
even if the memory card is full. The camera
will continue to record photos or videos by
deleting the first files recorded.
Power:
(Batteries/
Electricity)
Allow the user to select the battery power or
the electricity power.
Choose «Electricity» if the camera is
powered of a main electric supply. (using a
12 volt DC adapter AD-12V, sold separately).
Main electric supply is recommended for
security purposes. It provides an instant
trigger time when a movement is detected.
We recommend that you remove the AA
batteries when this power supply is used.
Although, lithium battery pack can remain
safely inside the camera and it is ideal in case
of a blackout. A 12 volt DC adapter that can
provide a minimum of 800 mA is required
(See «Options» for accessories).
Note: when using the electricity power, the
«Multi-shot» mode and the «Delay» between
photos are disabled as the camera starts
instantly every time it detects motion. Also,
the imprinting temperature on each picture is
disabled.