User's Manual

18
19
English
English
Delay:
(10s/1m/3m/5m/
10m/15m/30m)
Select the time interval between two photos
or videos.
Additional setting: it is possible to decrease
the delay between detections to 10 seconds
(instead of 1 minute) by using the following
procedure. Note that the battery life will be
affected.
Turn OFF the camera. Press and hold the
«» button and turn the camera ON . «10sec
enabled» appears on the screen meaning
the minimum delay is now 10 seconds. If
this option is used, the 30 minute delay
disappears. To reset the camera to 1 minute
delay, follow the same procedure. «10sec
disabled» appears on the screen (see figure
below)
Multi-shot:
(1/2/3/4/5/6
consecutive shots)
Take up to 6 consecutive shots at each
detection, with a 10 second delay between each
photo. This option allows up to 6 pictures
from different angles when the camera is in
«Photo» mode.
10SEC DISABLED10SEC ENABLED
10 sec delay 1 min delay
Video length:
(10s/30s/60s/90s)
Allow the user to select the recording
duration when the camera is set in «Video»
mode.
Language:
(English/Français/
Deutsch/Italiano/
Norsk/Česky/
Suomi/Magyar/
Polski)
Select a language for the camera’s menu.
Sensitivity:
(High/Medium/
Low)
Allow the user to choose between three
different levels of sensitivity: «High»,
«Medium» or «Low». The camera will only
detect sources of heat in movement. Make
sure to have the least possible objects in front
of the camera during the positioning. This
prevents picture taken by the camera when
oriented towards the sun while an object
moves in front of the camera (e.g. a branch)
Date:
Set the date as Month / Day / Year
Time format:
(12h/24h)
Allow the user to choose between a 12 or
24 hours period time displays on the photos
(eg. 6:00 pm or 18:00)
Time:
Set the time as Hour / Minute