Parts List

www.GUAY2.com 100% Made in TAIWAN
SETTING MAGAZINE
1.Charge up the battery.
2.Charging will be completed after 3 hours.
Do not catch your fingers in the dummy bolt.
Never hold the gun sideways as the BB
pellets will curve right or left.
It is strongly recommended the use of G&G BB pellets
only. Using low quality BB pellets will shorten product
life span and void product warranty.
Single shot
Semi Auto
Automatic firing
Full AutoSafety On
The trigger cannot be pulled
Front sight for GR16 C.Q.W.
Front sight for GR16 C.Q.W.
Trigger guard
Trigger guard
Hi-cap 450R magazine
Hi-cap 450R magazine
G-11-039
NI-MH 9.6V 1600 mAh
Open the cover of magazine. Load G&G 5.95mm BB pellets into the
magazine.
Close the cover plate then turn the gear
until the sound changes.
Insert the magazine until you heard a click
sound.
COMPONENTS
FIRING MODE & SAFETY
BATTERY SETTING
HOP-UP ADJUSTMENT
Best Position.
Too much Hop-up.
( Turn the adjust lever toward Normal )
Not enough Hop-up. ( Turn the adjust lever toward Hop )
or Too much Hop-up. ( Turn the adjust lever toward Normal )
Click
Click
Turn to Normal Turn to Hop
Mock flash suppressor
Mock flash suppressor
Folding stock
Folding stock
Q.D. Rail system
Q.D. Rail system
Detachable rear sight
RECOMMENDED
BATTERY TYPE
1.
2.
3.
4.
Please select quality battery with the CE approval, to avoid
any unnecessary damage on the product.
Please use either 8.4V or 9.6V battery, if different voltage
used, it might damage the product.
Remove the battery from the product when it is not in use.
Do not wet nor incinerate the battery, nor to deform the
terminal.
New Blow Back Pneumatic System
True to the faith of mimicking real life firearms, G&G is proud to
present its new Pneumatic Blow Back system to its line of airsoft guns.
Conventional airsoft blow back utilizes tow hook springs to mimic real
life bolt actions, which often lead to excess wear and tear and poor
reliability in the gear box.
To alleviate the problem of conventional systems, G&G has indepen-
dently developed the Pneumatic Blow Back system; a piston driven,
gas operated mechanism to better mimic real life bolt actions.
This new technology utilizes compressed air to move the bolt, which
enables the action without adding extra stress to the gear box.
This class leading system represents a significant milestone in the
airsoft industry.
Reinforced grip
Reinforced grip
Reinstall the Q.D.rail system.Release the plate lock. 1. Insert battery into the Q.D.rail system.
2. Reinstall the Q.D.rail system and lock
the plate lock.
Connect battery plug with the connector
until you heard a click sound.
Retractable stock
Retractable stock
Detachable rear sight
Selector lever
Selector lever
Charging handle
Charging handle