Parts List

Selector and safety setting .GR16/G4 GR16/G4. Installing battery
17 18
Lower the stock plate nail and open the cover. Close battery cover.Connect the connector until you heard a click
sound.Insert battery into the fixed stock.
Click
GR16 Metal A2 / A3 / A3 carbine / R4 / R5 GR16 A2 Plastic / R4 Plastic
For fixed stock version
Selector and safety setting
Installing battery
Always set the safety mode setting until immediately afrer firing
► Never operate the Selector while pulling the trigger.
Otherwise, malfunctions may occur.
► Pulling the trigger with the Selector being set at safe mode may damage the air gun.
Warning
► Use only the G&G battery purchased from your local dealer.
Warning
Automatic firing
Fully automatic mode
The gun will fire automatically while the
trigger remains pulled.
Single shot
Semi mode
The gun will fire one shot each time
when pulling the trigger.
The trigger can not be pulled
Safety setting mode
When you are not firing the gun or during
storage.
Always set the selector to the Safe position
and attach the protective cap on the
muzzle.
Pull the slip ring and hold.
Remove the lower handguard.
Set the battery beside the outer barrel.
Connect battery plug with the connector
until
you heard a click sound
.
Hold the battery and pull the slip ring.
Remove the lower handguard.
Click
GR16 Metal carbine / A2 carbine G4 CQB HGR16 carbine Plastic / GR16 Light carbine Plastic
For handguard version