User Manual

ManualsBrandsG&G ARMAMENT ManualsAirsoftGR14 Series

Address

Taipei / 11F-3,NO.27,Lane 169,Kangning St,Shijr City,Taipei County 22180,TAIWAN

Changhua / No. 999, Zhonghua Rd., Shengang Township, Changhua County 50952, Taiwan

E-Mail

Sales Department / sales@guay2.com

b2b@guay2.com

Technology support Department / support@guay2.com

Website

www.guay2.com

Tel

Taipei / 886-2-2692-2000

Changhua / 886-4-798-9000

Fax

Taipei / 886-2-2692-4000

Changhua / 886-4-798-9900

100% Made in Taiwan www.guay2.com

Manufactured by G&G ARMAMENT

100% Made in Taiwan www.guay2.com

Manufactured by G&G ARMAMENT

Summary of content (12 pages)

PAGE 1
00% Made in Taiwan www.guay2.com Manufactured by G&G ARMAMENT Address Taipei / 11F-3,NO.27,Lane 169,Kangning St,Shijr City,Taipei County 22180,TAIWAN Changhua / No. 999, Zhonghua Rd., Shengang Township, Changhua County 50952, Taiwan E-Mail Sales Department / sales@guay2.com b2b@guay2.com Technology support Department / support@guay2.com Website www.guay2.com Tel Taipei / 886-2-2692-2000 Changhua / 886-4-798-9000 Fax Taipei / 886-2-2692-4000 Changhua / 886-4-798-9900 100% Made in Taiwan www.guay2.
PAGE 2
WARNING This product is intended for users 18 years or older.Read all instructions before using this product. The buyer and the user of this product shall adhere to all local laws regulating the usage and the ownership of airsoft guns. Adult supervision required.Always wear safety goggles when using this product. Misuse or careless handling of this product may cause injury.May be hazardous up to 50 meters. Activating the trigger carelessly is extremely dangerous.
PAGE 3
GR14 E.B.R. Short Ver. 3 Page 1~2 WARNING Page 3 CONTENTS Page 4 GR14 SERIES LINE Page 5~6 COMPONENTS Page 7 SELECTOR & SAFETY SETTING Page 8 BATTERY SETTING Page 9 SETTING THE MAGAZINE Page 10 REAR SIGHT ADJUSTMENT Page 11 COLLAPSIBLE STOCK Page 11 ADJUSTABLE CHEEK REST Page 12 BOLT HANDLE Page 12 HOP-UP ADJUSTMENT Page 13~14 FIRING Page 15~16 TROUBLE SHOOTING Page 17~22 PARTS LIST GR14 E.B.R. Long Ver. S.O.C.
PAGE 4
GR14 E.B.R. Long Ver. GR14 Walnut Wood Stock GR14 E.B.R. Short Ver. 7 4 3 No. 5 Component Name 1 Flash Suppressor 2 Front Sight 3 Barrel Attachment 4 Sling (Foresight Mount) 5 Rail, Upper Part 6 Bolt Catch 7 Rear Sight Attachment 8 Sling (Rearsight Mount) 9 Magazine 10 Magazine Catch 11 Safety Cheek 12 Adjustable Rest Adjustment 13 Elevation Knob Adjustment 14 Windage Knob 6 5 8 Rifle Type 57 R.O.C. Walunt Wood Stock GR14 Black Stock 1 2 GR14 Imitation Wood Stock GR14 Veteran Rifle Type 57 R.
PAGE 5
SAFETY SETTING MODE SAFETY SETTING MODE Step 1 Set to safety mode. The trigger can not be pulled. Step 2 SEMI MODE (Single Shot) Insert the battery to the battery holder. A 7 Press and turn the selector to “ ” position. The gun will only fire one shot each time. Set the handguard upward then tighten the screws. SEMI MODE Step 2 FULLY AUTOMATIC MODE (for all series, except EBR) Connect the connector. 4 (Automatic Firing) Press and turn clockwise 180 degrees to “A” position.
PAGE 6
RIGHT Step 1 Press the magazine release to remove the magazine. LEFT Turning clockwise : To correct the shots leaning to the left. Turning counter-clockwise: To correct the shots leaning to the right. Step 2 Open the cover of magazine. WINDAGE ADJUSTMENT KNOB Load G&G 5.95mm BB pellets into the magazine. 9 WINDAGE ADJUSTMENT KNOB 10 Step 3 Close the cover and tighten the gear on the bottom. Step 4 Set the magazine upward. Insert the magazine into the body.
PAGE 7
COLLAPSIBLE STOCK BOLT HANDLE RIGHT SIDE CAUTION Be careful not to catch your fingers in the dummy bolt. Step 1 Step 1 Pulling the bolt handle backward then push the bolt catch. Bolt can be fastened rearward. Press the stock release button with thumb. Step 2 Pull the stock backward to adjust length until hear a click sound. (6 position ) 11 ADJUSTABLE CHEEK REST Step 2 Pulling the bolt handle backward again to release the bolt.
PAGE 8
After Operation Remove the magazine, direct the muzzle into a safe direction then fire the gun in semi-auto mode for a few shots. Set the safety to the safe position. Always disconnect the battery and attach the protective cap whenever you do not operate the air gun. Step 1 Make sure insert the magazine upwards and into the body. When it is properly inserted you will hear a click sound. Cautions on Motor and Battery SEMI ( Single Shot ) Charge the battery if the firing cycle becomes slow.
PAGE 9
When a problem occasion please check the steps below, other problems please turn to your dealer or contact us. No operation at all Although motor is revolving, no pellet can be fired 15 Impossible full-auto operation(automatic firing) Selector lever is set to safety. Set the selector lever to Semi or Full Auto. Battery is not charged. Charge the battery. Battery connector is disconnected. Connect the connector.
PAGE 10
No. 01 02 03 04 05 06 Parts Name No. Upper cover set Dummy Bolt Plate Upper receiver set Rear sight set Magazine Buffer plate 07 08 09 10 11 12 Parts Name Front barrel set Hop-up set Stock release button Recoil spring set Grip set Stock set No. 13 14 15 16 17 18 Parts Name Gas cylinder piston Bolt handle set Lower receiver set Sling attachment Gear box set Cheek rest set No.
PAGE 11
No. 01 02 03 04 05 06 Parts Name No. Upper cover set Dummy Bolt Plate Upper receiver set Rear sight set Magazine Buffer plate for GR14 Series 07 08 10 13 14 15 Parts Name Front barrel set Hop-up set Recoil spring set Gas cylinder piston Bolt handle set Lower receiver set 17 19 20 22 23 24 Parts Name Gear box set Trigger guard set Motor set Gas cylinder set Flash suppressor Inner barrel No.
PAGE 12
No. 01 02 03 04 05 06 Parts Name No. Upper cover set Dummy Bolt Plate Upper receiver set Rear sight set Magazine Buffer plate 07 08 10 13 14 15 Parts Name Front barrel set Hop-up set Recoil spring set Gas cylinder piston Bolt handle set Lower receiver set No. 17 19 20 25 26 27 Parts Name Gear box set Trigger guard set Motor set Gas cylinder set Flash suppressor Inner barrel No.