Parts List

Take out the BB loader.
Take out the cover plate. Insert the CO2 cartridge into the magazine. Follow steps 1 through 4 in reverse order.
Turn counterclockwise to release
the CO2 cartridge cover plate.
6
► Don’t expose CO2 cartridges to heat or store them at temperatures above 120°F(48.9°C).
► Don’t mutilate or incinerate CO2 cartridges.
► Keep hands and face away from escaping CO2 gas.
It may cause frostbite if it comes in contact with skin.
Warning
Semi mode
The gun will fire one shot each time
the trigger is pulled.
Safety setting mode
Push the button backward.
Step1 Step2 Step3
Step4 Step5 Step6
When you are not firing the gun always set the selector
to the safe position and attach the protective cap on the
muzzle.
You should also do this whenever you are storing your
gun in a case.
Warning
Before using the selector setting,
Please follow the steps below:
5
Selector and safety setting
► Never operate the selector while
pulling the trigger.
Otherwise, malfunctions may occur.
► Pulling the trigger with the selector
being set at safe mode may damage
the airsoft gun.
1.Pull the bolt handle up.
2.Slide the bolt handle back.
3.Then Slide the bolt handle forward.
4.Pull the bolt handle down to lock it into place.
5.Then use your selector setting
2
3
4
1
Installing CO2 cartridge