User Guide

MISCELLANEOUS FUNCTIONS

BFD and multiple outputs

There are three versions of the BFD plugin, which give different permutations of

outputs into the host. We made this decision because of some hosts' inability to

properly change the output configuration.

• BFD Stereo:

Stereo Master output only. This version mixes all microphone buses together with

the Direct Master stereo mix inside the plugin, outputting a single stereo pair. The

Master output fader controls the overall output volume of the plugin.

• BFD Groups:

Stereo Groups version. This version outputs each stereo microphone bus as an

independent stereo output. The Master output fader affects the volume of all buses

in a relative manner.

Output Name

1+2 Direct Master

3+4 Overhead bus

5+6 Room bus

7+8 PZM bus

• BFD All:

All Outputs version. This is the same as BFD Groups but, instead of a stereo mix

of the Direct signals, each individual kit-component has its own output. The Master

output fader affects the volume of all buses in a relative manner. Note that Logic

only supports a maximum of 16 outputs from a plugin so the direct signal from

cymbal 2 and 3 are mixed together.

Output Name (non Logic) Name (Logic)

1+2 Overhead bus Overhead bus