User Guide

• Pan:

Here, you can control the position in the stereo field of each Kit-Piece, in the Direct

Master stereo bus. They are only functional when using BFD Stereo or BFD

Groups, and are greyed out when using the BFD All version of the plugin, as the

individual mono Direct outputs do not need to be panned.

The kick and snare Kit-Pieces each have some special controls for the Direct bus.

• Kick in/out:

This control adjusts the blend between the mic placed inside the kick drum, and

that outside. If you click the button, the phase of the internal mic is inverted.

• Snare bot/top:

Using this control, the blend between the mics below and above the snare drum

can be adjusted. If you click the phase button, the phase of the bottom mic is

inverted.

3. Bus mixer area

This area allows easy control over the

overall mix. The Direct and each individual

ambient bus each have their own volume

fader here, as well as Solo and Mute but-

tons. In addition, the ambient mics have

two extra controls:

• Distance:

This parameter allows you to virtually

manipulate the distance of each ambient

mic set from the drumkit.