User Guide

33
Save your kit changes if you have made any modifications you would like to use
again, and load the BFD All plugin in place of the BFD Stereo you have been
using, and reload a kit. This version of the BFD plugin offers the most versatility
over the final mix. Please refer to the Host-specific Quickstarts if you don't know
how to use your host's multi-output facilities, or if you are not sure if it supports
them. You will see that you now have three stereo pairs (the ambient buses) and
eleven mono outputs available to you. When using a multiple output configuration,
BFD is operated in exactly the same way, except that each Direct Kit-Piece is
routed individually into the host's mixer, according to the rules shown above.
Therefore, if you are not getting any sound, or if you are only hearing certain parts
of the kit, it may be necessary to 'enable' the additional outputs in your host: for
example, in Logic Audio you need to create Aux channels and point them to one of
BFD's multiple outputs.