User Guide

51
AUTO GROOVE REPEAT BUTTONS
The two columns of three buttons on the right of the BFD interface are
used for auto-accompaniment purposes. Each column represents one of
the Groove Banks: the column on the left represents Bank A, while the one
on the right represents Bank B.
Auto Groove Repeat
When this option is checked, any triggered Groove will repeat until it is stopped by
a note-off (or by another note-on if in Latching Mode).
You can toggle this option via MIDI:
Auto Groove Repeat A ON/OFF: F4 or F6*, note no. 101
Auto Groove Repeat B ON/OFF: F#4 or F#6*, note no. 102
Auto Bundle Shuffle
When in Auto Groove Repeat mode, this option causes random Grooves within the
same Bank to play, instead of the triggered Groove being repeated. This option
has no effect when Auto Groove Repeat is disabled.
You can toggle this option via MIDI:
Auto Bundle Shuffle A ON/OFF: G4 or G6*, note no. 103
Auto Bundle Shuffle B ON/OFF: G#4 or G#6*, note no. 104
Auto Fill
When in Auto Groove Repeat mode, enabling this option causes a random Fill from
the Fill Bank to be played every n bars, where n is defined by the Auto Fill Period
option in the Play Options panel.
You can toggle this option via MIDI:
Auto Fill A ON/OFF: A4 or A6*, note no. 105
Auto Fill B ON/OFF: A#4 or A#6*, note no. 106
* depends on the state of the -2 Octave Numbering option in the Options panel.
A-B Link
Also located in the Auto Groove Repeat area is the A-B Link function.
When this is activated, any Groove note which is routed to Bank A