User Guide

49
• Next Bar:
This mode works in a similar way to Next Beat except that, when the next Groove
is triggered, it starts playing from the start of the next bar.
Default Groove
This parameter specifies the default Groove trigger note to play when the Respond
to Song Start option is enabled. Whatever Groove you have loaded into this note’s
corresponding Groove Bank slot will be triggered when you start playing your
song.
Auto Fill period (Bars)
Here, you set the period, in bars, between every Fill played when in Auto Fill
mode. For example, setting it to 16 will result in a Fill being played every 16 bars.
Latching Mode
When this mode is enabled, Grooves are tuned off not by a note-off message,
but by another note-on message of the same note number. Therefore, you hit a
key once to start the Groove, and hit it again to stop it. Please be aware that this
applies to all notes – those that you trigger from your keyboard, and those from
your sequencer.
Polyphonic Mode
When in Polyphonic Mode, multiple Grooves may be played simultaneously. A
newly triggered Groove doesn’t stop any other Grooves currently playing. This
is useful, for example, to layer grooves that are partial beat components, and for
overlaying ride and crash patterns over kick/snare/hat drumloop Grooves.
Respond to Song Start
Checking this option results in the default Groove (specified with the Default
Groove option described above) being played when the sequencer is started.
Respond to Song Stop
This option stops all Grooves which may be playing when the sequencer is
stopped.